MAXIEM-2030

MAXIEM-2030

MAXIEM® 2030 JetMachining® Center

The next generation MAXIEM® 2030 JetMachining® Center sets a new standard for abrasive waterjet machining. Faster, smoother, and more precise, the MAXIEM 2030 is ideal for a wide range of modern machining needs. The exclusive advanced Intelli-TRAX® digital linear encoder provides one-micron resolution instant feedback to the motor control system so the machine knows precisely where the cutting head is at all times. The mobile control station with widescreen display provides flexibility in controller positioning. Optional accessories such as the A-Jet® for 5-axis cutting and taper compensation, Rapid Water Level Control for submerged cutting, and DualPUMP options that provide up to 80 hp of power expand your JetMachining capabilities and dramatically improve production.

  • Fast cutting speeds and high precision that is backed by our exclusive Intelli-MAX® Software with real world cutting data
  • Programmable Motorized Z-Axis with a precision OMAX MAXJET®5i Nozzle boosts productivity and process efficiency
  • Drive system protected against water, dirt, and grit
  • Powerful all-in-one controller computer with large 23” screen
  • Highly efficient, industry-proven direct drive pumps available up to 40 hp with operating efficiencies up to 85%
  • Free Intelli-VISOR® SE System Monitoring simplifies routine maintenance planning to minimize downtime
  • Optional Rapid Water Level Control for quiet submerged cutting
  • Optional Bulk Abrasive Feed Assembly transports garnet from the assembly’s large hopper into the Zero Downtime Hopper located at the Programmable Motorized Z-Axis
  • Optional Variable Speed Solids Removal System (VS-SRS) designed for industrial use increases uptime through automated solids removal
  • Factory tested as a complete system before shipping
 

Benefits

  • Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics
  • Designed and manufactured at the OMAX factory in Kent, Washington, USA
  • Does not create heat-affected zones or mechanical stresses
  • No tool changes & minimal fixturing dramatically reduce setup
  • Convenient controller storage drawers keep essential tools and spares close by to maintain machine uptime
  • Uses substantially less cooling water than inefficient hydraulic intensifier pumps
  • Small, efficient footprint for minimal floor space utilization
  • Lowest electrical consumption compared to other pump technology
  • Leaves behind a satin-smooth edge, reducing secondary operations
  • No noxious fumes, liquid or oils used in, or caused by, the machining process
  • Environmentally “green” system uses only natural garnet abrasive and water in the cutting process.
 
Machine Dimensions:
Footprint 14’1” x 12’2” (4,293 mm x 3,696 mm)
Weight (Tank empty) 4,500 lb (2,041 kg)
Height (with scissor plumbing) 8’10” (2,515 mm)
Operating Weight (Water in tank) 20,500 lb (9,299 kg)
Work Envelope
X-Y Travel 10’0” x 6’7” (3,061 mm x 2,019 mm)
Z-Axis Travel 12” (305 mm)
Table Size 12’2” x 7’0” (3,708 mm x 2,134 mm)
Drive Description
  • Brushless servo motors
  • Stainless steel hardened precision ground shaft ways
  • Real-time closed loop feedback with digital drives
  • Bridge-style Y-Axis
  • Intelli-TRAX drive technology with precision linear encoders
  • Precision Programmable Motorized Z-Axis
Standard Model Specifications
Material Support Slats 40 4" x 14Ga Galvanized Steel (102 mm x 2 mm)
Maximum Supported Material Load 300 lbs/sq ft (1,465 kg/sq meter)
Electrical Requirements 3-Phase, 380-480 VAC ±10%, 50-60 Hz
Speed 500 in/min (12,700 mm/min)
Repeatability ±0.002" (±0.051 mm)

 

Available Accessories (see more...)